Velcro and a heavy cutting board. Suggest using Velcro tape on the Base of the unit and mount the other side of the Velcro onto something flat with some weight - heavy floor tile, marble cutting block or some thick glass. Should do the trick!

You need a firm wall mount so you won't be having constant contact, this could help

You can try double adhesive tape. 3M VHB tape offers one of the strongest bonds out of any adhesive.

Nỏ hiểu.

Make a board cutout in hard wood and stick it with double adhesive to reinforce the strength once fitted in. This should inspire new designs whilst testing your creativity

Hi, you can put 3 or 4 books or any other object next to it and around it

sanet negah darsh

Try putting a rubber texture like surface under it, it should stop it from moving if you use it on a desk.

Make a board cutout in hard wood and stick it with double adhesive to reinforce the strength once fitted in.
so it can help you

Make a board cutout in hard wood and stick it with double adhesive to reinforce the strength once fitted in. This should inspire new designs whilst testing your creativity

You could always use some wood and plexiglass to build a box cutout like the arcade games use. If my answer wins I would be happy to share a step by step guide to build one.

Try putting a rubber texture like surface under it, it should stop it from moving if you use it on a desk.

Use double sided tape and tape it to desired surface while playing

Theoretically you could use a TV tray, or clear a small four legged night stand even put it by your bed. Put some crazy glue if (preferred, tape) on side of a upside down mouse pad. Then there! Round about those structures.

Address to send funds:
tz1YekGwPZqAAd7b7xYtgjzWEqih8CT3RZEL


Thanks! :)

Hi, you can put 3 or 4 books or any other object next to it and around it

Damn son where you find that

Tablet Stand Holder - You can order Tablet Stand Holder at Ebay. This device can secure your console in place while you play your game. it's adjustable, can be folded and swivels 360 degrees.

use a two sided sticky tape

make a Case for button with a fixed bracelet to help old and you can also use the case for keeping it safe

Double sided Command Strips💯

2х сторонний автомобильный скотч!

You must put a few books next to it or you just grab it with tape

You need a firm wall mount so you won't be having constant contact, this could help

حيد

This joystick can be connected using bluetooth. As with Mobile, each key has a corresponding number from 0 to 9, and E1 and E2. The little red light is between the iPad slot and the joystick. The great thing about Ion is that it chose not to include a power switch here, instead letting the controller go into sleep mode when not in use. To reactivate it, you need to press any key or shake the joystick.

Wooow

You can buy the pads used for under the chair tools.

I dont know

u can use tape and play

I would try either two faced tape or velcro depending on what your mounting it too

Cool

Get a professor's lectern and attach velcro to the flat part and to the bottom of your electronic handles. Your speed at the game device will be much faster when standing than when sitting as your entire will in on the action. At the same time, you will need to clamp the entire stand down on the floor. Wether a wood or tile floor. Do it in a door way.